|
เอี๊ยมพีวีซี
Brand name: -
Short Description: เอี๊ยมพีวีซี ตัวยาว |
 |
|
|
|
|
ถังเอนกประสงค์พกพาพับได้ + กระเป๋าใส่ : สีเหลือง
Brand name: Save Life Products
Short Description: ถังเอนกประสงค์พกพาพับได้ + กระเป๋าใส่ : สีเหลือง
- มีทั้งหมด 4 สีให้เลือก
- ใส่น้ำได้ ไม่รั่ว
- มีน้ำหนักเบา พกพาได้สะดวก
- บรรจุน้ำได้ถึง 13 ลิตร |
|
|
|
|
|
|
|
|
|
|
|
ร้านขายกาแฟสำเร็จรูป
Brand name: Best
Model: M0002
Short Description: ร้านกาแฟสำเร็จรูป
ขนาด 4.00 x 5.00 x 2.45 เมตร
สามารถย้ายเคลื่อนที่ได้โดยสดวก |
|
|
SAFE-T-LIGHT
Brand name: SAFE-T-CUT
Model: SAFE-T-LIGHT T3
Short Description: |
|
|
TMBS E
Brand name: SKF
Model: -
Short Description: The SKF TMBS E strong back pullers facilitate dismounting of bearings in applications where the use of traditional jaw pullers is restricted due to lack of space or where the application demands a long reach. TMBS 100E and the TMBS 150E bearing extractors are equipped with a hydraulic spindle, which allows for effortless application of force up to 100 kN (11.2 ton US). The TMBS 50E is equipped with a mechanical spindle for force generation.
Special bearing separator design allows the puller to be easily inserted between the bearing and the shoulder on the shaft, even in the tightest spaces
The firm grip behind the bearing's inner ring reduces the force required to dismount the bearing
High load rating of 100 kN (11.2 ton US) make the TMBS 100E and TMBS 150E suitable for use in many applications
TMBS 100E and TMBS 150E offer complete hydraulic puller kits, allowing effortless generation of force
The extension rods of the TMBS 100E and TMBS 150E allow easy and quick adaptation to required pulling length
Maximum reach of 825 mm (32.5 in) and maximum shaft diameter of 150 mm (6 in) allow the TMBS E series to be used in many applications
The hydraulic spindle is equipped with a safety valve, which limits the applied force to 100 kN (11.2 ton US), minimising the risk of puller overload
The spring-loaded centre point of the hydraulic spindle allows easy centring of the puller on the shaft without damaging it
Long stroke of hydraulic spindle, 80 mm (3.1 in), facilitates dismounting in one operation
Pumping mechanism used for force generation is effortless and more efficient than turning mechanism
Extension pieces of the hydraulic spindle allow quick adaptation to pulling length
|
|
|
TMHC 110E
Brand name: SKF
Model: -
Short Description: The SKF TMHC 110E is a hydraulic puller kit, which combines a jaw puller and a strong back puller with up to 100 kN (11.2 ton US) pulling power. The versatile puller kit facilitates safe and easy dismounting in a variety of applications.
Unique combination of a hydraulic jaw and a strong back puller for use in various applications
High load rating of 100 kN (11.2 ton US) make the TMHC 110E suitable for use in many applications
Hydraulic spindle facilitates easy and quick dismounting, effortless generation of force
The jaw puller includes 2 different arm sizes for maximum reach of 115 mm (4.5 in.)
The jaw puller can be assembled as a three-armed or two-armed puller depending on the space and demands of the application
The firm grip of the strong back puller behind the bearing's inner ring reduces the force required to dismount the bearing
The special separator design of the strong back puller allows the puller to be used even in the tightest spaces
The extension rods of strong back puller allow a maximum reach of 255 mm (10 in.) for quick adaptation to required pulling length |
|
