|
alpha.f
Brand name: Technotrans
Model: alpha.f
Short Description: ระบบกรองน้ำพิเศษ สำหรับตู้น้ำเย็นของเครื่องพิมพ์ระบบออฟเซ็ต เหมาะสำหรับเครื่องพิมพ์ขนาดเล็กและขนาดกลาง |
 |
|
Industrial Sensors
Brand name: LUCAS-NULLE
Model: -
Short Description: Sensors are needed for the open-loop control of technical processes using programmable controllers. They convert physical variables
into electrical output signals and assume the function of the human senses. As such, sensor technology is fundamental to this field
and indispensable for any automation technician.
|
|
|
|
|
|
Static Converters with DC Motors
Brand name: LUCAS-NULLE
Model: -
Short Description: The static converter equipment sets can be expanded into converter drives at minimum added cost simply by adding the corresponding
electrical machine. The digital controller then transforms this assembly into an automatically controlled drive. To investigate the
drive under load in four-quadrant operation mode all you need is a servo brake. |
|
|
Practice-Oriented Training in Process Control Technology
Brand name: LUCAS-NULLE
Model: -
Short Description: The development of circuits and the appropriate choice of circuit elements and equipment lie at the focal point of this training
segment.
Multi-pole loads can be connected directly into a three-phase circuit up to a specified power class. To accomplish this there
are corresponding switching devices, which may be deployed differently depending on the application.
|
|
|
Programmable Compact Controls
Brand name: LUCAS-NULLE
Model: -
Short Description: (Ideal Introduction to Process Control Assignments)
The initial foundation stones for the programming of compact control systems were built on classic process control and digital technology.
These exercises serve as preparation for training in automation technology. The compact controllers are equipped with their
own displays. Programming can be carried out without the need for an additional PC.
|
|
|
Electropneumatics in Automated Control
Brand name: LUCAS-NULLE
Model: -
Short Description: (Pneumatic Cylinders Directional Control Valves Process Control Elements)
Use of compressed air to transmit power has become more and more attractive. Pneumatic systems are frequently being used for such
tasks as transport, drilling, grinding, winding, sorting, and open- and closed-loop controls. This can be attributed to the fact that in some
automation tasks there is simply no better or more efficient tool that can be used. |
|
|
Multimedia-Based Automation,
Brand name: LUCAS-NULLE
Model: -
Short Description: (Programmable Logic Control (PLC))
Todays highly automated industrial landscape is characterised by machines which operate more or less automatically. As a rule these
systems are operated by programmable logic control. Developments are leading to more decentralised control systems utilising field bus
systems. |
|
|
Multimedia-Based Automation, Bus Technology
Brand name: LUCAS-NULLE
Model: -
Short Description: (Field Bus Systems PROFIBUS)
A PLC controller alone is no longer seen as the central unit of
an automated system. Complete automation solutions now
integrate sensors, drives and other actuators as well as the
components used for system operating and monitoring. Using
standardised field bus systems, it is possible to fully integrate a
variety of different systems, for example. |
|
|
Fully Configured Basic Equipment Sets
Brand name: LUCAS-NULLE
Model: -
Short Description: Fully Configured Basic Equipment Sets
In addition to the recommended basic set, all of the CPUs in the 300 series are available as fully configured units.
To implement automation assignments comparable to those actually used in industry, the STEP 7 software package is employed. The
system features object-oriented programming of automation units in line with the IEC 1131-1 standard. Editors are also available
for the languages LD (Ladder Diagram), FBD (Function Block Diagram), IL (Instruction List), ST (Structured Text, designated Structured
Control Language, SCL, in STEP 7) in addition to the GRAPH tool (for Sequential Function Chart programming) plus tools for software
testing and hardware configuration. |
|
