Brand : REGIN
Model : RCF-230D
Room thermostat for fan-coil applications
with on/off outputs.
Intended to control heating and/or cooling in 2- or 4-pipe
installations. Setpoint and fan speed are set using the buttons on the front.
Pressure Independent Characterised Control Valves - PICCV
? Control Valve + Constant Flow Control
? Equal-percentage control performance guaranteed
? Easy selection, no Kvs calculation required
? Constant flow control
? Lower installation cost, long life expectancy
? Prevents overflow or underflow for fast start-up
Characterised control valve, 3-way, Internal thread
? For closed cold and warm water systems
? For modulating water-side control of air handling units and heating systems
? Air bubble-tight (control path A - AB)
Spring return actuator with emergency function for
adjusting air dampers in ventilation and air conditioning
systems in buildings
? Torque 10Nm
? Nominal voltage AC 24...240V / DC 24...125V
? Control: Open-close
? Control: modulating DC 0...10V
The SM-501 Series Duct Smoke Detector provides early detection
of smoke and products of combustion present in air moving through
HVAC ducts in Commercial, Industrial, and Residential applications.
The unit is designed to prevent the re-circulation or spread of smoke by
air handling systems, fans, and blowers. Complete systems may be shut
down in the event of smoke detection.
The SM-501 model will operate on any one of four input voltages
(230VAC, 115VAC, 24VAC, or 24VDC). The SM-501 allows up to 30
detectors to be interconnected for many common functions.
The type 604 pressure switch is used as a ?p flow switch in
ventilation ducts for the control of filters and fans, and in
primary and secondary control systems for the control of air
The 604 pressure monitoring switches are also ideally suited
to protect heating coils from overheating and for monitoring
industrial air cooling circuits.