|
Servo Control,with Drawer and Adjustable Height
Specification :• Power : AC 220 V/ 50 Hz/ 300 Watt• Control Type : Microcontroller• Skin Temp. : Indicating : 17,0 – 42,5 °C, in 0,1 °C Setting : 34,0 – 37,0 °C overridden to 38,0°C• Air Temp. : Indicating : 17,0 – 42,5 °C, in 0,1 °C Setting : 25,0 – 37,0 °C overridden to 39,0°C• Alarm (LCD Dot Matrix, alarm off 10 minutes) :Power Failure, Low Battery, Sensor Failure, System Failure (Watchdog Timer), Probe Failure, Fan/ Air Failure, Air Over Temp. , Skin Over Temp. , High Temp. , Warm-up Failure, Skin Set Deviation ± 1°C, Air Set Deviation ± 3°C• Humidity : 20-100% LCD Digital Hygrometer• Noise Level : ≤ 45 dB• Warm-up Time : ≤ 25 minutes• Oxygen limiter device with micro filter• Radiotransparent mattress tray tilted 12° smoothly by crank• Emergency access door large opening down OPTION :• Adjustable IV Pole with Fixation Clamp• Double Wall• Portable Phototherapy• X-Ray Cassette Drawer• Digital Baby Scale• Oxyhood• Port Diaphragms
 Transport Inc. Manual Ctrl AC/DC w/Battery Nicad,fold.trolley ss
Specification :Power consumption : 150 Watts max.Applicable Power Requirement :• Mains AC 220 V/ 50 Hz/ 2 A fused.• Auxiliarry Battery (Car Plug) DC 12 V / 15 A fused.• Power Box DC 12 V UPS (Optional) : DC 12 V/43 Ah/ 15 A fused.Temp. Control : Analog Proporsional Controller.Temp. Setting : 27 °C – 37 °C in 1 °C stepWarm Up Time : Approx. 30 minutes with AC power source.Alarm : Audible & visible• High Temperature Safety ≥ 38 °C.• Battery Indicator lamp good or bad (low).• Heater lamp.Humidity : 20 – 100 % LCD, to increase add water to sponge.Noise Level : Approx. 50 dB(A).Access Port : Two snap open port.Dimension : Incubator : App. 84 L x 44 W x 46 H cm. Mattress : App. 54 L x 27 W x 3 T cm.Weight : Approx. 25 kgs. Power Box DC 12 Volts Uninterruptible Power Supply (Optional) :• Input : AC 220 V/ 50 Hz / 2 A fused• Output : DC 18 V (no load), 12 V (full load), 200 Watts maximum allowable load.• Built-in Automatic Battery Charger• Battery : Dry Lead Acid 12 V/ 43 Ah• Battery condition indicator : Low battery indication lamp (below 11 V), full (12 V) & charging indication lamp.Dimension : 45 W x 22 D x 33 H cm.Weight : Approx. 30 kg. Optional : Folded Trolley • Fixed Trolley • Oxygen Tank & • Power Box Stainless Steel Steel Regulator DC 12 V UPSTSN 89 TRFSS TSN 89 TRST TSN 89 TRBNiApp. 100 L x 47 W x (61-90) H cm App. 80 L x 40 W x 86 H cm App. 23 kg App. 10 kg• IV Pole Stainless Steel• Illumination lamp• Emergency Access Door
 Infant warmer
Specification : Power : AC 220 V/ 50 Hz/ 800 Watts. Heater : Infrared. Control : Manual Analog Proportional Controller. Temperature control : 32 °C – 37°C, in 1°C step. Alarm : High Temp. Alarm ≥38°C, audible & visible. 60 minutes Apgar Timer, sounds at 1, 3 and 5 minutes. Dual digital display. Illumination lamp : Two 20 watts fluorescent lamps or two 20 watts phototherapy lamps (Optional). Bed Inclination : App. 20°, manually. Side Wall : Four acrylic, height : App. 15 cm, three of it swing-down. Castor : Four Ø 4”, Two with brakes. Dimension Total : 100 L x 61 W x 196 H cm. Dimension Mattrass : 72 L x 52 W x .......H cm. Weight : App. 50 kg. OPTIONAL • Oxygen Resuscitation System (Demand valve automatic resuscitator, oxygen change valve with humidifier & flowmeter, resuscitator masks, test lung, aspirator bottle, airway, face mask). • Oxygen Cylinder. • Oxygen Regulator. 
Specification Dimension Feature : - head 700Lx650Wx100Hmm - base 700Lx650Wx155Hmm - weight approx. 35 Kg Construction : square steel pipes Painting : powder coating Hour meter : 0 - 9999 hour Castor : 2” Power Consumption : 100watt/220volt
4 mm Acrylic with nipple Oxygen |
