|
|
|
Page View 9504 |
Product Information : |
|
Product Name: |
|
PIEZONIZER Zapp |
|
Product Category: |
|
เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล
|
Product Sub-Category: |
|
High Frequency Wave-method Static Eliminator
|
Brand: |
|
SSD |
Product Type : |
|
สินค้า, ผลิตภัณฑ์
|
Short Description : |
|
This is an air nozzle Ionizer Incorporating an ultra-small- size high-voltage transformer without any high-voltage wiring. |
|
|
|
|
PIEZONIZER Zapp
PIEZONIZER
High FRBIIUOICV Air ionizer
This is an air nozzle Ionizer Incorporating an ultra-small- size high-voltage transformer without any high-voltage wiring. Because the high-voltage transformer is of the piezoelectric type producing a high-frequency wave output, it can efficiently generate high density ion at a lower voltage than the conventional AC type system without any noise. Since it operates only on DC power input, its wiring has become much simpler. Furthermore, these ionizer devices incorporate safety circuitry as a standard feature, which detects any abnormality that may occur in the high voltage circuits. Whenever a failure should occur, the device can output an alarm.
PIEZONIZER Zapp
Features
- Zapp allows input of compressed air at a pressure from 0.02
to a maximum of 0.5MPa to Perform excellent effect.
- With stable low Ion balance, it can be safely used for Ionization
of electronic devices, etc. (within A)15V at a distance of 10mm
by the OZ-5 nozzle).
- Because the emitter is Inside Zapp, the impact Of the corona
discharges will not be externally exerted, allowing It to be used
safely for ionization at close distance,
- Numerous types of nozzles are available to meet the requirements of various applications.
- It has a high Ion density per unit area, permitting it to be used for Ionization of electrostatic from objects with smell areas.
PIEZONIZER AGZII
Features
AGZII is an air gun-type ionizer with a built-In
SSD New Piezo-technology, which ionizes the charged object and removing the dust attached by static to the object by blowing It away with air. The air gun Is lightweight and small in size, fitting well In hand with an ultra-small size piezoelectric transformer, without any high-voltage cables.
- Made of plastic, the gun weighs only 280g when held fitly in hand, greatly increasing the work efficiency.
- The safety design of the device is ensured with SSD piezo-technology transformer inside the gun without H.V. section or H.V. cable required.
- High performance and excellent ion balance
- Energy-saving and low-voltage design to generate corona discharges.
- Working range of air pressure: 0.05 to 0.6Mpa
- Working range ofairconsumption: 1 92N_/0.6Mpa hour
PIEZONIZER ANZ-S
Features
ANZ is a pencil-type air nozzle Ionizer. With SSD Piezo-technology it weighs only 95g, being most suitable for use in long hours of static and the dust removal work.
- The main unit is a pencil type with a thin body of z?2Omm, fitting well to fingers. Weighing only 95g, it would not cause
fatigue even after long hours of work.
- With SSD Piezo-technology, ANZ perform highly effect and excellent ion balance
- It is supplied with a dedicated controller that allows controls of high-pressure output and air by turning ON/OFF the switch
installed on the main unit
- A powerful air blow from the ionizer allows dust to be removed with ease. |
|
|
|
|
|
|
|