Fine Tuning for Pharmaceuticals
การปรับตั้งค่าอย่างละเอียด สำหรับ เครื่องบรรจุในอุตสาหกรรมผลิตยา นับเป็นประโยชน์อย่างมากสำหรับ ผู้ผลิตยาและเวชภัณฑ์ในประเทศไทย ในการปรับปรุงคุณภาพของการผลิต โดยการปรับปรุงประสิทธิภาพของเครื่องจักรให้ทันสมัยมากยิ่งขึ้น
Last Update : 15:11:31 17/07/2012
หลักการ โครงสร้าง และ รูปแบบต่างๆ ของ Air Shafts
Air shaft ใช้กันอย่างแพร่หลายในวงการอุตสาหกรรมที่เกี่ยวข้องกับ Web Control เช่น การควบคุมความตึง การปล่อยออกและการม้วนเก็บ ของวัสดุที่เป็นม้วนต่างๆ เช่น ผ้า พลาสติก กระดาษ ฟิล์ม และอื่นๆอีกมาก
Last Update : 03:28:18 01/07/2012
ETP-E PLUS
Brand : ETP, Miki Pulley
Model : ETP-EXPRESS, ETP-E PLUS Series, ETP-E N Type, ETP-E C Type
ETP-E PLUS สุดยอดนวัตกรรมใหม่ล่าสุดที่ทำให้การจับยึดชิ้นงานและแกนเพลาเข้าด้วยกัน สะดวก ประหยัดเวลา และ ไม่ใช่เรื่องยากอีกต่อไป อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
Last Update : 18:47:34 17/03/2024
Screw jack ? Overall
Brand : Makishinko
Model : JA, JAH, JAS, JTA, JB, JBH, JTB, NX, BX
Screw Jack คุณภาพดี ผลิตจากประเทศญี่ปุ่น ใช้ในการยกและจับยึดชิ้นงานอย่างมั่นคง ปรับระดับความสูง ความเอียงของชิ้นงานได้ แข็งแรง ทนทาน และ รับ load ได้ดี อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
Last Update : 18:47:11 17/03/2024
Pipe Coupling
Brand : NITCO
Model : GR-S, GR-L, RCH-S, RCH-L Series and etc.
ปัญหาท่อแตก ท่อรั่ว ท่อซึม ความยาวท่อไม่พอ ต้องยุ่งยากในการต่อท่อ แก้ไขได้อย่างง่ายดายด้วย NITCO Coupling อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
Last Update : 18:46:43 17/03/2024
GGM Geared Motor
Brand : GGM
GGM Small Gear Motor มอเตอร์เกียร์ ขนาดเล็ก คุณภาพเยี่ยมจากเกาหลี ขนาดตั้งแต่ 6 Watt ถึง 200 Watt พร้อม เกียร์ อัตราทดมีให้เลือกหลากหลาย ตั้งแต่ 1/3 - 1/200 อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
Last Update : 18:46:03 17/03/2024
Signal Tower Light
Brand : KOINO
Model : KTL Series
KOINO Signal Tower Light ไฟแสดงสถานะการทำงานของเครื่องจักร ไลน์การผลิต หุ่นยนต์ และอื่นๆ จากประเทศเกาหลี ใช้หลอดไฟ LED สว่าง ชัดเจนทั่วทุกทิศทาง 360 องศา มีด้วยกันทั้งหมด 5 สี แดง เหลือง เขียว น้ำเงิน ขาว ให้เลือกสรร มีฟังก์ชั่น ไฟติดต่อเนื่อง กระพริบ หรือ มีเสียงเตือนให้เลือกใช้ได้ตามต้องการ ขนาดมาตรฐาน ง่ายต่อการติดตั้งและบำรุงรักษา อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
Last Update : 18:45:07 17/03/2024

Page View  17207  
Product Information :

Product Name:  
Eight conductor Model 830
Product Category:   เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล
Product Sub-Category:   7 Mercotac Rotary Electrical Connector
Brand:   Mercotac 
Product Type :   สินค้า, ผลิตภัณฑ์ 
     
 

 

Model 830
Eight Conductors,
2@4amps, 6@30amps

Disconnects included
(4 sm., 12 lg.)
Boot Kit available
Available with stainless steel ball bearing (830-SS)

 
Model No. Terminals Voltage
AC/DC
Amp
Rating
@240VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
830 8 0-250 2@4/6@30 100

<1m

200 140 (60) /-20(-29) 1000

>25M

830-SS 8 0-250 2@4/6@30 100

<1m

200 140 (60) /-20(-29) 1000

>25M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 830 Accessories
55110
22 - 18 AWG (qty. 4 included)
55253
Shrink Tube (qty. 6 included)
55252
Terminal 16 - 14 AWG
(qty. 6 included)
55251
Terminal 16 - 14 AWG
(qty. 6 included)
57830
Boot Kit for dust or splash protection
IP51
 

Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)

 
Model 830 Standard Wire Connections

Model 830 Wire Connections With Optional Boot Kit
Model 830 Suggested Mounting Methods
Model 830 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions

MODEL HOLE DIAMETER (Ø) * DEPTH
830, et al 1.772" (45.00) .80" (20)
     
Typical Bushing Mount Hole Dimensions
830, et al 1.125" (28.57) .40" (10)
*Inch (mm) Tolerance Ø +.001" (+.025)    
  -.000" (-.000)    












Installation Notes:
  • the up arrow should not point below horizontal
  • do not solder to or bend connector tabs
  • avoid lateral forces and mechanical loads (overly stiff or tight wires)
  • do not rigid mount both ends of connector
  • limit mounting eccentricity (runout / wobble) to .005" (.13mm)
  • provide overload protection within the circuit
  • avoid vibration and bumping motions

 

 

สนใจติดต่อขอรายละเอียดเพิ่มเติมได้ที่

บริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด

Tel: 02-223-2271-3

Fax: 02-225-5546

E-mail: info@namsae.co.th

Website: www.namsae.com

Facebook: www.facebook.com/namsaefanpage

Line: @namsae

Instagram: namsae_official

 

© 2000-2008 CopyRight by Namsae International Trading Co.,Ltd.
Tel. 02-223-2271  Fax. 02-225-5546, 02-622-9352  Website. www.namsae.com
disclaimer | privacy | contact us

  Sale Login Warehouse Login Driver Login