SAMCHULLY POWER CHUCK
SAMCHULLY HS SERIES Standard 3-Jaw High Speed Open Center Chucks : Known worldwide for excellent quality, Samchully produces power chucks, hydraulic cylinders and scroll chucks. Samchully Machinery Co., Ltd. has achieved and maintains its' ISO 9001, and CE Mark certifications. Power chucks and hydraulic cylinders for CNC lathes manufactured by Samchully are standard equipment in products made by Hyundai-KIA and Doosan (Korea's top machine tools manufacturers). Samchully is also a major supplier of chucking systems to HAAS Automation, Inc. • Samchully HS series chucks are interchangeable with Kitagawa B200 series chucks • Samchully HCH series chucks are interchangeable with Kitagawa B series chucks • Samchully MH and Kitagawa BB (Big Bore) series share the same specifications • Samchully HT series chucks are interchangeable with Kitagawa BT series chucks FEATURES: • 3-jaw, wedge-type chuck with large bore • Powerful gripping force and high turning speed • Interchangeable with Kitagawa B200 Series power chucks • Manufactured from high grade alloy steel • All sliding surfaces are hardened and ground for accuracy and repeatability • 2 & 4 jaw and Mega Bore chucks also available • Large variety of replacement parts in stock
Last Update : 11:49:45 16/02/2012
RIKEN SEIKI Collet Chucks
Quality First : SAD type collet chuck , WSC wide type collet chuck , Pull type collet chuck , Multi type collet chuck , PWC Pull type wide chuck , Inside diameter clamping
Last Update : 11:49:24 16/02/2012
Roundness Measuring instruments
Brand : Tokyo seimitsu
Model : RONDCOM 65A
เครื่องวัดความเรียบผิว
Last Update : 23:35:04 19/11/2014
เครื่องวัดหัวกัดCNC (TOOL PRESETTER)
Brand : ALFA-SYS เครื่องวัดหัวกัดCNC (TOOL PRESETTER)
Model : tools presetter
เครื่องวัดหัวกัดCNC (TOOL PRESETTER)
Last Update : 15:51:33 02/11/2014
TOOLING
Brand : TOOLING
Last Update : 10:04:22 23/08/2014
CPB Power Collet Chuck
Brand : JATO Collet Chuck
Last Update : 10:49:46 23/05/2014
HAINBUCH
Brand : HAINBUCH
Last Update : 20:49:14 05/04/2014

Page View  18107  
Product Information :

Product Name:  
HIKARI MULTI-HEAD PRODUCT INTRODUCTION
Product Category:   เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล
Product Sub-Category:   HIKARI SEIKO
Brand:   HIKARI SEIKI 
Product Type :   เครื่องมือ, เครื่องจักรและอุปกรณ์ 
Short Description :   HIKARI MULTI-HEAD PRODUCT INTRODUCTION
     
 

HIKARI MULTI-HEAD PRODUCT INTRODUCTION

1.SPINDLE INTERVAL ADJUSTABLE TYPE

(1) ALL GEAR TYPE

Contents:
This is the type that can change an interval between 2 spindles freely.
This enabled the compactification of the external form for gear drive.

*spindle interval (min) *spindle interval (min)
*spindle interval(max) *spindle interval(max)
(MODEL) HMK-110N 2spindles(collet type)
(SPEC) Drill process (P=18mm(min)~110mm(max))

(2) UNIVERSAL JOINT TYPE

Contents:
This used a universal joint by a drive method.
Therefore this can change it of P.C.D freely.

*spindle P.C.D(min) *spindle P.C.D(min)
*spindle P.C.D(max) *spindle P.C.D(max)
(MODEL) HMK-120 6spindles(collet type)
(SPEC) Drill process (P.C.Df52mm(min)~120mm(max))

(3) BELT DRIVEN TYPE(Straight line movement type)

Contents:
This spindle interval can change on a straight line freely.
This does not have the noise and the vibration for a belt drive type.
This is suitable for light processing such as woodwork or the aluminum.

*spindle interval(min) *spindle interval(min)
*spindle interval(max) *spindle interval(max)
(MODEL) HMK-SV250ï¾—115 2spindles(collet type)
(SPEC) Drill process (P=30mm(min)~120mm(max))

Guidance

The other products carry it by the example introduction of the Japanese site,
and please look at it.

Details are here.(Japanese)

 

2.SPINDLE FIXED TYPE

Contents:
This produces it based on customer specifications (a spindle interval, processing diameter, the number of the processing).
This contributes to productivity improvement, labor saving.

for 3.5 inches hard disk case processing

for 3.5 inches hard disk case processing
(MODEL) HMF-S165X175 12spindles(collet type) with a guide plate
(SPEC) Drill processing (2.8 / 2.5 /2 / 1.95mm Processing simultaneous)
(MODEL) HMF-S140X190 T8spindles(collet type)
(SPEC) Tap processing(M2.5 / M2 / 6-32UNC Processing simultaneous)

for compressor part processing

*for compressor part processing
(MODEL) HMF-SE350X290 T12spindles+12spindles
(SPEC) Up section : Tap processing
Down section:Drill processing
Install to special purpose machine

Guidance

The other products carry it by the example introduction of the Japanese site,
and please look at it.

Details are here.(Japanese)

 

3.ONE-TOUCH CHANGE TYPE

Contents:
Multi-drill head drive department can precisely and easily change this by one-touch operation.
This can do centering for positioning knock pin precisely.
This is suitable for many kinds production.
This is easily put on and taken off with a catch grip.

ONE TOUCH CHANGE TYPE

The left side: The machine fixation side (drill press etc.)
The right side: The multi-drill head drive department side


ONE TOUCH CHANGE TYPE
(MODEL) HMF-S150鐓|P50 T6spindles(collet type)
(SPEC) Tap processing(M5)

Guidance

The other products carry it by the example introduction of the Japanese site,
and please look at it.

 

4.MULTI-DRILL HEAD FOR MACHINING CENTER

Contents:
This contributes to more productivity improvement of the machining center.
we produce a product for various BT shanks.
*Explanatory note
But there is a limit to an external form and weight. (In the case of ATC device use)

MULTI-DRILL HEAD 4SPINDLES (BT50shank) MULTI-DRILL HEAD 4SPINDLES (BT50shank)


Guidance

The other products carry it by the example introduction of the Japanese site,
and please look at it.

 

5.ANGLE HEAD

Contents:
This is suitable for space-saving drill processing and cutting processing.

spindle motor
spindle motor *The photograph is with a spindle motor.


Guidance

The other products carry it by the example introduction of the Japanese site,
and please look at it.

 

6.TAP HOLE CHECK UNIT

Contents:
Many of examination with screw go by manual labor.
This is the machine which was developed to do the inspection reasonably.
This contributes to shortening of the examination with screw time, labor saving, quality improvement.
This is most suitable for the inspection of the screw diameter (M1.6~ M6).
This has a lot of results of the auto mobile parts, electronic parts
Drive source:
The drive source of this is a small motor (10W - 40W).
(connected with a flexible wire.)
This can use even a drill press.

HMT-P110 (TYPE-A) HMT-P110 (TYPE-A)
applied set applied set


Guidance

The other products carry it by the example introduction of the Japanese site,
and please look at it.

 

7.HMT-K1 Automatic tapping screw inspection machine

There was such a needs and developed it.
  • 1.Because motor parts and electronic parts became the examination for all quantity, I want an automatic check machine.
  • 2.I want the automatic check machine which inspection bigger than M6 can play.
  • 3.I want an automatic check machine using the gauge.
    iInspection wants to do it surely every one place and, as for the inspection time, wants to shorten it;).
  • 4.The reason is because it inspects this machine surely , and because it uses a gauge.
  • 5.This machine performs inspection and the removal of the garbage at the sametime.
    (Special gauge specifications)
  • 6.When this machine changes a lead screw, inspection of various screw pitch is possible.
A use merit
  1. Torque setting can play this machine.
  2. Rotary adjustment can play this machine.
  3. This machine performs the depth adjustment with an external sensor.
  4. Thereas onis because it inspects this machine surely , and because it uses a gauge.
  5. This machine performs inspection and the removal of the garbage at the sametime.
    (Special gauge specifications)
  6. When this machine changes a lead screw, inspection of various screw pitch is possible.

This machine is suitable for inspection(through) for tapping screw(internal thread: M6-12)

machine explanation
HMT-P110 (TYPE-A)


Active Osaka Promotion Fund
 

© 2000-2008 CopyRight by Win Win Co., Ltd.
Tel. +66(0) 2573 7933-5  Fax. +66(0) 2-573 7898  Website. www.winwinthailand.com
disclaimer | privacy | contact us

  Sale Login Warehouse Login Driver Login