Brand : Dantherm
The FS is a range of compact modular horizontal bag filters particularly suitable for larger industrial plant, especially for handling fine particulate associated with hot gas applications. The flat bag design minimizes the space required and the progressive off-line medium pressure air cleaning system is energy efficient.
Key features
Unit pre-assembled and tested in factory
Very compact modular space saving design
Robust weatherproof welded steel construction
Off-line cleaning during full load operation
Efficient down-flow inlet air flow pattern
Fast installation
No compressed air required
Low emissions, long filter bag life
Typical dust control and process applications
Hot metal processes, aluminum / non-ferrous, iron and steel
Waste incineration / Biomass processes
Crematoria
Foundry processes
Asphalt plants
Brand : Dantherm
The MJC Mini range of compact reverse jet tubular cartridge filters was developed for continuous operation in industrial process filtration and dust collection applications incorporating Dantherm UniClean (patented) cartridge technology for maximum cleaning efficiency and extended life.
Key features
Standard filter range from 4 to 40m2
Robust weatherproof fully welded steel construction
Space saving integral fans from 0.75 to 3.0kW
4.0kW higher pressure fan available
ATEX compliant features for St1, St2 and St3 dusts
Integral pre-separation chamber, cross flow / down flow inlet air pattern
Modular interchangeable assemblies
Typical dust control and process applications
Materials handling conveying, screening, sieving, mixing, bin/silo venting
Shot, sand and bead blasting
Building materials manufacture and distribution
Dust extraction for all dry free flowing powders and granular material
Welding and cutting processes
Chemical, plastics and pharmaceutical powders
Brand : Dantherm
Description
CYCLOPAC cyclofilters are used to extract dust from processes and separate the dust from the air stream. Whilst mainly used for processes that produce large quantities of dust in woodworking industries, they may be used in many other industries where dust emitting processes are used. Effective extraction of dust and chips produced by a machine tool improves its production capacity.
Features
High efficiency design
Outdoor placement
Excellent for high volumes of waste
Small footprint
Positive or negative configurations
Single units up to 160,000 m3/h
Typical dust control and process applications
Wood and timber products manufacture
Particle board and panel manufacture
Paper processes
Plastics
Handles large volumes of dry light dusts
Brand : Dantherm
The Auto M Z-Series is the latest generation of robust simple mechanically cleaned dust collectors suitable for non-continuous duty for industrial, commercial and educational locations.
Key features
Neat, compact, unobtrusive, easy to clean exterior
Robust weatherproof welded steel construction
Electric shake cleaning, perfected by 30 years' experience
No need for compressed air
ATEX certified Baseefa 03 ATEX0225 for explosive dusts
Simple maintenance, access from clean air side
Many options including secondary filters to increase versatility.
Typical applications
Metalwork, grinding, fettling, sanding, polishing
Woodwork, dust extraction from small and medium workshops
Bulk powders, chemicals, sack tipping, weighing, bagging
Educational workshops ceramics, metal work, crafts, woodwork,
Brand : Dantherm
The NFZ3000 range builds upon the vast experience gained from the long established NFZ2000 range of positive pressure modular high volume wood waste filters. Available now for positive or negative pressure operation, it has been externally tested to gain ATEX certification and benefits from quicker assembly and suitability for a wider range of applications. Suitable for small to very large systems.
Key features
Modular galvanised steel construction
Easy to install on site and extend when required
Weatherproof for exposed locations
Powerful on-line cleaning by efficient regeneration fans
ATEX certification for St1 and St2 dusts (NFZ3000)
Maintenance access only from front
No compressed air required
High efficiency Dantherm Superbag media.
Wide range of waste handling and discharge options
Typical dust control and process applications
Timber and Wood working machinery dust extraction
Furniture production plant waste management
Lightweight bulk materials manufacture and distribution
The FS is a range of compact modular horizontal bag filters particularly suitable for larger industrial plant, especially for handling fine particulate associated with hot gas applications. The flat bag design minimizes the space required and the progressive off-line medium pressure air cleaning system is energy efficient.
Key features
Unit pre-assembled and tested in factory
Very compact modular space saving design
Robust weatherproof welded steel construction
Off-line cleaning during full load operation
Efficient down-flow inlet air flow pattern
Fast installation
No compressed air required
Low emissions, long filter bag life
Typical dust control and process applications
Hot metal processes, aluminum / non-ferrous, iron and steel
Waste incineration / Biomass processes
Crematoria
Foundry processes
Asphalt plants
The MJC Mini range of compact reverse jet tubular cartridge filters was developed for continuous operation in industrial process filtration and dust collection applications incorporating Dantherm UniClean (patented) cartridge technology for maximum cleaning efficiency and extended life.
Key features
Standard filter range from 4 to 40m2
Robust weatherproof fully welded steel construction
Space saving integral fans from 0.75 to 3.0kW
4.0kW higher pressure fan available
ATEX compliant features for St1, St2 and St3 dusts
Integral pre-separation chamber, cross flow / down flow inlet air pattern
Modular interchangeable assemblies
Typical dust control and process applications
Materials handling conveying, screening, sieving, mixing, bin/silo venting
Shot, sand and bead blasting
Building materials manufacture and distribution
Dust extraction for all dry free flowing powders and granular material
Welding and cutting processes
Chemical, plastics and pharmaceutical powders
Description
CYCLOPAC cyclofilters are used to extract dust from processes and separate the dust from the air stream. Whilst mainly used for processes that produce large quantities of dust in woodworking industries, they may be used in many other industries where dust emitting processes are used. Effective extraction of dust and chips produced by a machine tool improves its production capacity.
Features
High efficiency design
Outdoor placement
Excellent for high volumes of waste
Small footprint
Positive or negative configurations
Single units up to 160,000 m3/h
Typical dust control and process applications
Wood and timber products manufacture
Particle board and panel manufacture
Paper processes
Plastics
Handles large volumes of dry light dusts
The Auto M Z-Series is the latest generation of robust simple mechanically cleaned dust collectors suitable for non-continuous duty for industrial, commercial and educational locations.
Key features
Neat, compact, unobtrusive, easy to clean exterior
Robust weatherproof welded steel construction
Electric shake cleaning, perfected by 30 years' experience
No need for compressed air
ATEX certified Baseefa 03 ATEX0225 for explosive dusts
Simple maintenance, access from clean air side
Many options including secondary filters to increase versatility.
Typical applications
Metalwork, grinding, fettling, sanding, polishing
Woodwork, dust extraction from small and medium workshops
Bulk powders, chemicals, sack tipping, weighing, bagging
Educational workshops ceramics, metal work, crafts, woodwork,
The NFZ3000 range builds upon the vast experience gained from the long established NFZ2000 range of positive pressure modular high volume wood waste filters. Available now for positive or negative pressure operation, it has been externally tested to gain ATEX certification and benefits from quicker assembly and suitability for a wider range of applications. Suitable for small to very large systems.
Key features
Modular galvanised steel construction
Easy to install on site and extend when required
Weatherproof for exposed locations
Powerful on-line cleaning by efficient regeneration fans
ATEX certification for St1 and St2 dusts (NFZ3000)
Maintenance access only from front
No compressed air required
High efficiency Dantherm Superbag media.
Wide range of waste handling and discharge options
Typical dust control and process applications
Timber and Wood working machinery dust extraction
Furniture production plant waste management
Lightweight bulk materials manufacture and distribution
The Dantherm S-Series budget dust collector range is a simplified version of the long established and respected Dantherm NF wood waste filter family. Quick to install and easy to operate, it is the ideal solution for the smaller workshop. It is designed for indoor locations and can be readily re-located as required
Key features
Neat, compact, unobtrusive
Quick and easy to install
Bag or steel bin dust collection options
Standard units in three sizes
One bag size fits all
Quiet running efficient 1450 RPM fans
Simple maintenance
Dantherm QF versatile clip together duct connections
Typical applications
Woodwork, dust extraction from small and medium workshops
Mixed workshop applications
Educational workshops ceramics, crafts, woodwork,
The SiloSafe compact reverse jet tubular cartridge filter, available as a venting filter or with an integral fan, was developed specifically for silo and bin venting applications incorporating Dantherm UniClean (patented) cartridge technology for maximum cleaning efficiency and extended life.
Key features
Robust fully welded steel, hot dip galvanized construction
Weatherproof for exposed locations
High strength, independently tested to resist explosions, for ATEX compatibility
Tough integral mounting flange
Generous internal volume with 24m2 filter area
Low height, minimal visual impact
Safe maintenance from clean air side
Typical applications
Venting of pneumatically filled silos and bins
Cement batching and distribution facilities
Venting continuously filled silos and day bins