Brand : GESTRA
Model : DK45 ,DK47-L, DK57-L, DK47-H, DK57-H
Discharge with virtually no banking-up
Robust, insensitive regulator
Installation in any position
Max. admissible back pressure 80 % of the upstream pressure
Brand : GESTRA
Model : BK 45, BK 15, BK 46, BK 37, BK 27, BK28, BK29, BK212
Thermostatic steam trap with corrosion-resistant thermostatic element (Duo stainless steel bimetallic regulator)
unaffected by waterhammer.
Pumps for general iindustries, automobile & part (paint shop), sugar mill, pulp & paper, power generation, chemical & petrochemical, water & waste treatment, steel
neutral gases, vapours and liquids in all sectors of industry.
Straight-through bellows-sealed stop valve with fanges to EN 1092-1. The valve is designed for shutting off
The stop valve ETCV PN25 is particularly suitable for steam, water condensate, oil and air.
Continuous monitoring of transparent liquids
to detect any ingress of insoluble
foreign
matter
causing turbidity,
such as emulsified
oils and greases. Measuring of turbidity and
signal
evaluation for indication, recording
and
control. Tripping
of alarms, control valves .
etc.
The design is based on the Kármán vortex street principle using a body installed perpendicular
to
the axis of the pipe. The vortices generated in the flow stream produce
pressure oscillations which
are converted into electrical signals by a sensor.
The output signal is then evaluated and processed
in the flow computer.
Steam regenerators are used to produce
saturated steam for a secondary
system from steam or pressurized hot water. Pure steam, without any contaminants that might be detrimental to health such as hydrazine, is produced. Steam